Tell you how to detect aluminum foil adhesive coating.aluminium foil coffee bag

When composite aluminum foil becomes an aluminum foil bag in a composite bag, the surface of the aluminum foil printing is coated with a protective agent, while the other side is coated with an adhesive. Whether the adhesive coating is uniform and whether there are any holidays will directly affect the sealing quality of the blister packaging, that is, the sealing performance.

Simple discrimination method: In a place with sufficient light, observe with the naked eye. If there are clear straight stripes or very thick and short discontinuous straight horizontal stripes, it is considered a non-conforming product. The bonding layer of qualified products should be very smooth and flawless.

Detection and quantitative method: take 5 pieces of 100 mm | * 100 mm samples from the finished product with 1/10000 Analytical balance, weigh them respectively, wipe off the adhesive with ethyl acetate, butanone or other solvents, and weigh again: the difference between the two is the coating amount, and calculate the average value of the coating amount of 5 pieces. The difference between the coating amount of each piece and the average value should not be more than ± 10%.

In addition, the thickness of the adhesive layer has a significant impact on the degree of bonding fastness. If the adhesive layer is applied too thin, it will reduce the bonding fastness due to the lack of material during hot pressing of PVC hard sheets. The use of a heat sealing instrument to detect the heat sealing strength of the composite layer can determine whether it meets the quality requirements.

Read recommendations:

Bag-In-Box

aluminium spout pouch Factory

spout pouches Manufacturing

Thermal insulation: the guardian of temperature

Soluble environmentally friendly plastic packaging bag.packaging kraft paper pouch bag