Top-line packagingTel: +86 188 2689 9458

Top-line packagingEmail: info@toplinepackaging.com

Top-line packaging
Top-line packaging

Introduce the relevant knowledge information of Vacuum Zipper Bags

source:other news release time:2023-03-07 Hits:    

  Vacuum zipper bag wholesaler

  Vacuum Zipper Bags, also known as personal tide -proof bags, aluminum foil bags, aluminum -plastic composite bags, is generally made of PET/AL/CPE or PET/NY/AL/CPE. Among them, PET -printing effect is good, NY -low oxygenity, AL -strong obstruction, opaque, CPE -internal packaging. Glue: water -soluble glue (more hygienic, environmentally friendly, non -residual solvents). Vacuum Zipper Bags has good anti -static, oxygen, shielding, moisture -proof, shielding function and excellent thermal performance. How to use Vacuum Zipper Bags:

  1. Pay attention to the bag before and after inflatable. Don't scratch the sharp objects. When operating, it should be performed on the bed or clean desktop. If there are hard objects such as buttons such as buttons, zippers, etc. in the storage items, fold them and put them in a collection bag. When stored in a cabinet or elsewhere, pay attention to whether there are sharp objects in the storage area to ensure that the bag is intact.

  2. Try to put clothes, quilts and other items in the bag as much as possible. The zipper of the seal is at least 3-5 cm. Do not force it in large items.

  3. In order to ensure the cleanliness of the sealing zipper, if the fiber and dust enter, the sealing performance will be reduced. It is recommended to wipe it with a wet gauze before pulling the zipper. After turning off the zipper, please hold the pull head with your hand and pull it back and forth several times at the seal to ensure that the two tones of the seal are completely buckled into the groove to ensure the sealing effect.

  4. When using the pump, twist the thread interface of the pump to the end, and press it on the white rubber pads of the pumping mouth to ensure that there is no air leakage at the interface. Generally, a large bag needs to suck for 3 to 5 minutes. It takes about three times and 500 to have obvious flattening phenomena. When using a pump, pay attention to continuous suction. If there is a vacuum cleaner at home, it will be effort and convenient.

  5. After pumping, check the seal again to ensure the seal.


Read recommendations:

Smell Proof Stand Up Flat Bottom Pouch Coffee Bag /Coffee Beans Bag With Air Release Valve And Reusa

reusable Snack food bag manufacture

bag in box packaging sales

Can the use of vacuum bags ensure that the food does not get moldy?

composite packaging bag

Popular recommendation

Share:

Email

Wechat Whatsapp

Leave Your Message