How to measure the thickness of food packaging bags?

　　Measurement unit of vacuum packaging bag thickness:

　　Silk is the unit of measurement for the thickness of packaging bags. Normal 1 wire=0.01 mm. If there are 8 wires on one side, the thickness is 0.08mm.

　　Measuring tools for the thickness of vacuum packaging bags:

　　The direct and simple way to know the thickness of the food vacuum bag is to measure it directly with a micrometer. Micrometer is also called screw

　　Spin micrometer. It is a tool specially used to measure micrometers.

　　Operation method for measuring the thickness of vacuum packaging bag:

　　1. Check the zero point before use, and slowly turn the fine adjustment knob to make the measuring rod contact the anvil until the ratchet makes a sound. At this time, the zero dividing line on the movable ruler (movable sleeve) should be aligned with the datum line (long horizontal line) on the fixed sleeve, otherwise zero error will occur.

　　2. Hold the ruler frame with the left hand, and turn the coarse adjustment knob with the right hand to make the distance between the measuring rod and the measuring anvil slightly greater than the measured object. Put it in the measured object and turn it for protection. Protect the knob until it clamps the measured object until the ratchet makes a sound. Rotate the fixing knob to fix the measuring rod and take the reading.

　　Reading method:

　　1. Read fixed scale first

　　2. Read the half scale again. If the half scale mark is exposed, record it as 0.5mm; If the half scale mark is not exposed, it shall be recorded as 0.0mm;

　　3. Re read the movable scale (pay attention to evaluation). Recorded as n × 0.01mm;

　　4. The final reading result is fixed scale+half scale+movable scale+estimated reading.

Read recommendations:

PET food bag

spout pouch packaging bags Factory

new super pouch wholesaler

Classification and material of packaging bags

Is there anything to pay attention to when producing liquid packaging bags in summer?Flexible Packag