Tell you why there is a heat sealing layer on the composite packaging film.stand up valve coffee bag Vendor

source:other news release time:2023-06-14 Hits:

1. Wrong selection of Adhesive or poor heat resistance of adhesive.

2. The curing agent ratio is out of balance. Possible reasons for the imbalance in the ratio of curing agents include: a. human error in the ratio; b. The ambient temperature is too high; C. The solvent contains water, alcohol, or activity - OH genes; d. The solvent in the ink was not fully dried.

3. Insufficient curing or too low temperature.

4. Insufficient drying. Because the solvent is not completely volatilized during printing or compounding, there are many residual solvents. Although these solvents may not contain active chlorine and will not affect the cross-linking reaction of Adhesive, the solvent will swell the adhesive layer and may vaporize at high temperature, so although it has little impact on the composite strength at normal temperature, it may cause heat seal separation layer.

5. The impact of printing ink. First, the inactive solvent in the ink, the resin or additives in the ink consume part of the curing agent, which causes the imbalance between the main agent of the Adhesive and the curing agent, resulting in the heat seal separation layer. When using heat-resistant polyester amine inks or chlorinated polypropylene inks for high-temperature heat sealing applications, a heat sealing separation layer may occur.

Read recommendations:

Pouch with handle

bag in box packaging manufacturer

mini pet food bag custom

bag in box packaging Solution.Learn about children's food packaging bags

What should I pay attention to when printing food packaging bags?

Popular recommendation

Coffee & Tea pouch

Eco Friendly Plastic Mylar Pouch Stand Up 50ml 100ml 200ml 250ml Custom Aluminum Spout Pouch

Wholesale High Barrier Plastic Stand Up Flat Bottom Pet Dog Food Packaging Bag

aluminium spout pouch manufacturer

bag in box packaging