How to determine the standard of food vacuum packaging bag?

source:other news release time:2022-11-09 Hits:

　　First, observe the tightness of the seal. If there is a small joint in the seal, the product is considered unqualified.

　　Secondly, visually inspect the surface of the vacuum packaging bag for composite food for scratches and pinholes. Focus on checking whether the seals are contaminated. It cannot be determined immediately by visual inspection, and slight negligence is the cause of erosion in the future. Check the seal, spray the surface active agent with dye on the seal, see if it passes, and determine the adhesion of the seal.

　　Then comes the seal strength test. Check the sealing of the composite vacuum packaging bag and cut it into 15mm wide strips. Use a material tester to measure the strength of the seal at a rate of 300 ± 20mm/min. Generally, the sealing strength of the composite bag shall reach 2334N./15mm.

Read recommendations:

Custom Print Side Gusset Coffee Pouch Black Matte Coffee Beans Packaging With Valve

Spout pouch manufacturer

Flexible packaging film roll direct sales

How much do you know about PE bag blowing film?properties of flexible packaging films distributors

How to judge the quality of sterile bags.stand up zipper pouch bags

Popular recommendation

BIB Bag-in-box dispenser with butterfly valve vitop for drinking water wine juice

Aluminum foil bag

Flexible packaging film roll

kraft spout pouch wholesale

juice bag in box distributors