Barley packaging bag.biodegradable clear mailing bags

source:other news release time:2023-05-25 Hits:

1. The numeric setting of the equipment of the device is inaccurate

2. There is a phenomenon of storm tendon or ruffled by printing substrates

3. The processing department of the printing perimeter is accurate, and the Mark line design is not standardized

1. Set the accurate parameters of the device to align the optoelectric eye on the Mark line

2. Replace the use of qualified and flawed printing substrates

3. The diameter difference between the length of the printing version should be gradually increased, because the impact of the material roll, traction tension and drying temperature during the processing process of the substrate will occur. The difference in the diameter must be considered in the version of the version, and the Mark line used for the pump must be very standard and standard

1. There is a gap on the ink scraping blade

2. The ink species has impurities and operating processes to be brought to the ink scraper blade to form a knife line

3. The surface processing of the print version is not good

Read recommendations:

Super pouch

bag in box wine Processing

flat bottom coffee bag

baby pacifier newborn wholesale.What are the good properties of food packaging bags

Why does the aluminum foil heat -stress -resistant strength is not good?aluminium spout pouch manufa

Popular recommendation

125g 250g 500g 1kg Aluminum Foil Flat Bottom Coffee Bean Bags With Valve

BIB Bag-in-box dispenser with butterfly valve vitop for drinking water wine juice